The blade is designed for knife – oscillate work and supports material thicknesses up to 52 mm with a 60 degrees+88 degrees cut angle and a 1.5 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K64e is especially relevant for board – soft such as Corrugated Plastic, corrugated sandwich, Dispa(R), F-Sorb(R) and Foam Board, flexible material such as Carpet, Cork, Ejection Rubber, Fiber Glass and Foam, textile such as Felt, corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute and corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 3.5 + 0.03 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K64e is also listed with compatible or alternative reference terms including 5002739, S64, SE64, Z64 and Zund Z64 (5002739). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – static/drag work and supports material thicknesses up to 20 mm with a 45 degrees + 90 degrees cut angle and a 1.5 mm blade thickness. The round stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K46r is especially relevant for shank diameter such as 8, board – soft such as Corrugated Plastic, Foam Board, Fome-Cor(R) and Insite(R) Foam Board, film / vinyl such as 3M(R) Diamond Grade, 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber and General Formulations(R) Vinyl, flexible material such as Ejection Rubber, Foam, Gasket Material, Magnetic Foil and Magnum Magnetics and leather such as Leather Hide. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-K46r is also listed with compatible or alternative reference terms including 34143362, 8146, BLD-SR8146, K46r and Kongsberg BLD-SR8146 (34143362). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 16.5 mm with a 55 degrees + 81.5 degrees cut angle and a 1.5 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K60 is especially relevant for board – soft such as Corrugated Plastic, Dispa(R), F-Sorb(R), Foam Board and Fome-Cor(R), corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute, corrugated single such as A Flute, B Flute and C Flute, corrugated triple wall such as E/B/E Flute and flexible material such as Carpet, Cork, Ejection Rubber, Fiber Glass and Foam. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 2.2mm + 0.15mm mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K60 is also listed with compatible or alternative reference terms including 5201345, SE60, Z60 and Zund Z60 (5201345). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 112 mm and a 1.5 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K602 is especially relevant for stock type such as Round Stock, shank diameter such as 6, flexible material such as Fiber Glass, Foam and Insulation and board – soft such as F-Sorb(R), Foam Board, Fome-Cor(R), Insite(R) Foam Board and Polyester Acoustic Board. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 3.8 + 0.02 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K602 is also listed with compatible or alternative reference terms including 5210306, Z602 and Zund Z602 (5210306). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 92 mm and a 1.5 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K604 is especially relevant for flexible material such as Fiber Glass, Foam and Insulation and board – soft such as Corrugated Plastic, Dispa(R), F-Sorb(R), Foam Board and Fome-Cor(R). These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 3.8 + 0.02 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K604 is also listed with compatible or alternative reference terms including 5210310, Z604 and Zund Z604 (5210310). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 29 mm with a 83 degrees + 5 degrees cut angle and a 1.5 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K68 is especially relevant for board – soft such as Corrugated Plastic, corrugated sandwich, Dispa(R), F-Sorb(R) and Foam Board, corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute, corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute, corrugated triple wall such as A/B/A Flute and E/B/E Flute and composite such as Armid Dry Fiber, Dry Carbon Fiber, Dry Glass Fiber and Nomex(R) Dry Fiber. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 1.9 + 0.12 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K68 is also listed with compatible or alternative reference terms including 5204301, S68, SE68 and Zund Z68 (5204301). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 57 mm with a 60 degrees+88 degrees cut angle and a 1.5 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K64 is especially relevant for board – soft such as Corrugated Plastic, corrugated sandwich, Dispa(R), F-Sorb(R) and Foam Board, flexible material such as Carpet, Cork, Ejection Rubber, Fiber Glass and Foam, textile such as Felt, corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute and corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 3.5 + 0.03 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K64 is also listed with compatible or alternative reference terms including 5002739, S64, SE64, Z64 and Zund Z64 (5002739). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 20 mm with a 81.5 degrees cut angle and a 1.5 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K61 is especially relevant for board – soft such as Corrugated Plastic, corrugated sandwich, Dispa(R), F-Sorb(R) and Foam Board, flexible material such as Carpet, Cork, Ejection Rubber, Fiber Glass and Foam, textile such as Felt and Polyester Coated, corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute and corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 2.2 + 0.15 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K61 is also listed with compatible or alternative reference terms including 5201343, 895061, E61, IECHO E62, K61, S61, SE61, Z61 and Zund Z61 (5201343). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – static/drag work and supports material thicknesses up to 4.8 mm with a 50 degrees cut angle and a 1.5 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools. The physical dimensions are 2.22 cm long, 1.63 cm wide and .35 cm high, so it can be checked quickly against existing tool storage, ordering records and machine documentation.

In day-to-day production, CS-K83A is especially relevant for board – rigid such as EVA – Ethylene Vinyl Acetate, Expanded PVC, Sign Foam(R) and Sintra(R), board – soft such as Corrugated Plastic, Fome-Cor(R) and Polycarbonate Sheet, composite such as Kapton, Prepreg Carbon Fiber, Prepreg Quartz, Prepreg Unidirectional Carbon Fiber and Toray(R) Prepreg Carbon Fiber, flexible material such as Magnetic Foil, Magnum Magnetics, PTFE, PVC Banner and Rubber and folding carton such as 2XL (85pt), Extra Heavy (50pt), Light (20pt) and XL (32pt). These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values include a 0.84 mm start overcut and a 0.84 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K83A is also listed with compatible or alternative reference terms including 5206878, D83, K83, Z83 and Zund Z83 (5206878). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – static/drag work and supports material thicknesses up to 14 mm with a 60 cut angle and a 1.5 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools. The physical dimensions are 2.22 cm long, 1.63 cm wide and .35 cm high, so it can be checked quickly against existing tool storage, ordering records and machine documentation.

In day-to-day production, CS-K44 is especially relevant for board – soft such as Corrugated Plastic and Styrene, flexible material such as Carpet, PVC Banner and Tarpaulin and textile such as Felt. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values include a 0.58 mm start overcut and a 0.58 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K44 is also listed with compatible or alternative reference terms including 3910340, 895044, D44, DE44, Z44 and Zund Z44 (3910340). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.