The blade is designed for route – through work and supports material thicknesses up to 8 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd553 (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd553 (Coated) is also listed with compatible or alternative reference terms including 42451104, 500-9867, BIT-MUS06-3006-50C1, CGR308U-58XO, Colex T00529, Kongsberg BIT-MUS06-3006-50C1 (42451104), Summa 500-9854, Summa 500-9867 and T00529. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 12 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd523 (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd523 (Coated) is also listed with compatible or alternative reference terms including CGR124D, R124 and Zund R124 (3910748). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 11 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd76 is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 80000, shank diameter such as 3 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd76 is also listed with compatible or alternative reference terms including 3910757, R76 and Zund R76 (3910757). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 13 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd526 (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 6, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd526 (Coated) is a suitable option when the product name, machine compatibility and material information match the blade already used in production. Always confirm the selected blade against your machine setup and the material being processed before running a full job.

The blade is designed for route – through work and supports material thicknesses up to 14 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd524 (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 4, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd524 (Coated) is also listed with compatible or alternative reference terms including CGR124D, R124 and Zund R124 (3910748). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 16 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd525 (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 5, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd525 (Coated) is also listed with compatible or alternative reference terms including CGR124D, R124 and Zund R124 (3910748). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 7 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd122 is especially relevant for flutes such as 1 Flute, routing diameter such as 2, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd122 is also listed with compatible or alternative reference terms including 42458810, BIT-MDS06-2008-64, G42458810 and Kongsberg BIT-MDS06-2008-64 (42458810). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 22 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd136 is especially relevant for flutes such as 1 Flute, routing diameter such as 6, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd136 is also listed with compatible or alternative reference terms including 3910750, 3910770, 42458414, BIT-MDS06-6020-64, CGR136D, Colex T00499, G42458414, Kongsberg BIT-MDS06-6020-64 (42458414), PSD-625, R126, R136, Rs206d, T00499 and Zund R136 (3910770). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 22 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd158 is especially relevant for flutes such as 1 Flute, routing diameter such as 4, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd158 is also listed with compatible or alternative reference terms including 3910768, 42449389, Colex T00506, G000-00513, Kongsberg BIT-MDS06-4012-50 (42449389), P1-418d, PSD-418, T00506 and Zund R134 (3910768). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 22 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd126 is especially relevant for flutes such as 1 Flute, routing diameter such as 6, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd126 is also listed with compatible or alternative reference terms including 3910750, 42458414, 500-9881, BIT-MDS06-6020-64, CGR136D, Colex T00499, G42458414, Kongsberg BIT-MDS06-6020-64 (42458414), PSD-625, R126, Rs206d, Summa 500-9881, T00499 and Zund R126 (3910750). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.