Up Cut – Cutter Supplies ApS

CS-Ru156-A

Katrine — Fri, 21 Aug 2026 06:34:20 +0000

CS-Ru156-A is a router bit for professional digital cutting environments. Multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 6mm cutting edge diameter and max milling depth of 32mm. It is made for shops running Colex, Cosign, Gerber, IECHO, Kongsberg, Multicam and Summa cutting systems, making it a practical replacement choice when you need predictable fit and familiar cutting behavior across established digital cutting workflows.

The blade is designed for route – through work and supports material thicknesses up to 32 mm with a Up Cut cut angle.

In day-to-day production, CS-Ru156 is especially relevant for flutes such as 1 Flute, routing diameter such as 6, max rpm such as 50000, shank diameter such as 6 and length overall such as 64. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru156 is also listed with compatible or alternative reference terms including 3910710, 42438077, BIT-MUS06-6032-64, CGR156, Colex T00503, ER66.3C, IECHO ER66.3C, Kongsberg BIT-MUS06-6032-64 (42438077), PSU-2599, R156, R172, T00503 and Zund R156 (3910710). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

CS-Ru2065

Katrine — Fri, 27 Mar 2026 16:09:16 +0000

CS-Ru2065 is a router bit for professional digital cutting environments. Multi-purpose (not recommended for ACM and metals), single O-flute, right-hand spiral (up cut) router bit with a 6,5mm cutting edge diameter and max milling depth of 7mm. If cutting metals or ACM we highly recommend our Rainbow/DLC coated 500 series. It is made for shops running Colex, Cosign, Gerber, IECHO, Kongsberg, Multicam and Summa cutting systems, making it a practical replacement choice when you need predictable fit and familiar cutting behavior across established digital cutting workflows.

The blade is designed for route – through work and supports material thicknesses up to 7 mm with a Up Cut cut angle.

In day-to-day production, CS-Ru2065 is especially relevant for flutes such as 1 Flute, routing diameter such as 6.5, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru2065 is also listed with compatible or alternative reference terms including 42447715, 500-9865, 500-9874, BIT-MUS06-6012-50, BIT-MUS06-6022-64, BIT-WUD06-6025-64, CGR100, CGR101, CGR116, CGR206, Colex T00500, CWT-ER66.2B, CWTER66.2B and CWX-ER66.2B. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

CS-Ru220-A

Alex Steiner — Fri, 13 Dec 2024 21:59:43 +0000

CS-Ru220-A is a router bit for professional digital cutting environments. Router bit for light foams. ?Super? carbide, 2-flute, right-hand spiral (up cut) router bit with a 6mm cutting edge diameter and max milling depth of 53mm. Length overall is 90mm. With stop ring (for use with the Zund ARC system and IECHO Tool Changer).
This bit is a replacement for the CS-Ru120. The bit has been shortened to work with the ARC system. It is made for shops running IECHO and Zund cutting systems, making it a practical replacement choice when you need predictable fit and familiar cutting behavior across established digital cutting workflows.

The blade is designed for route – through work and supports material thicknesses up to 53 mm with a Up Cut cut angle. The physical dimensions are 4 cm long, 0.5 cm wide and 0.5 cm high, so it can be checked quickly against existing tool storage, ordering records and machine documentation.

In day-to-day production, CS-Ru220-A is especially relevant for flutes such as 2 Flutes, routing diameter such as 6, max rpm such as 25000, shank diameter such as 6 and length overall such as 90. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru220-A is also listed with compatible or alternative reference terms including 5211735 and Zund R220-A (5211735). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

CS-Ru220

Alex Steiner — Fri, 13 Dec 2024 20:59:43 +0000

CS-Ru220 is a router bit for professional digital cutting environments. Router bit for light foams. ?Super? carbide, 2-flute, right-hand spiral (up cut) router bit with a 6mm cutting edge diameter and max milling depth of 53mm. Length overall is 90mm.
This bit is a replacement for the CS-Ru120. It is made for shops running Colex, Cosign, IECHO, Kongsberg, Multicam, Summa and Zund cutting systems, making it a practical replacement choice when you need predictable fit and familiar cutting behavior across established digital cutting workflows.

In day-to-day production, CS-Ru220 is especially relevant for flutes such as 2 Flutes, routing diameter such as 6, max rpm such as 25000, shank diameter such as 6 and length overall such as 90. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru220 is also listed with compatible or alternative reference terms including 3910728, 5211645, Zund R120 (3910728) and Zund R220 (5211645). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

CS-Rp106 (Diamond Polishing Bit)

Alex Steiner — Fri, 13 Dec 2024 20:59:35 +0000

CS-Rp106 (Diamond Polishing Bit) is a router bit for professional digital cutting environments. Diamond polishing bit. 6mm shank, 6mm routing diameter, 6mm max material thickness. It is made for shops running Colex, IECHO, Kongsberg, Multicam, Summa and Zund cutting systems, making it a practical replacement choice when you need predictable fit and familiar cutting behavior across established digital cutting workflows.

The blade is designed for route polish work and supports material thicknesses up to 6 mm with a Up Cut cut angle.

In day-to-day production, CS-Rp106 (Diamond Polishing Bit) is especially relevant for flutes such as 2 Flutes, routing diameter such as 6, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rp106 (Diamond Polishing Bit) is also listed with compatible or alternative reference terms including 3910780, 42452169, CGP106, Kongsberg Polishing Bit (42452169), Monocrystalline diamond polish bit and Zund P106 (3910780). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

CS-RuW5418 (Wood Bit)

Alex Steiner — Fri, 13 Dec 2024 20:59:26 +0000

CS-RuW5418 (Wood Bit) is a router bit for professional digital cutting environments. Router bit for composite wood with top print laminate. Multielement multilayered ?rainbow? coated, ?Super? carbide, 2-flute, right-hand spiral (up cut) router bit with a 4mm cutting edge diameter and max milling depth of 18mm. It is made for shops running Colex, Cosign, IECHO, Kongsberg, Multicam, Summa and Zund cutting systems, making it a practical replacement choice when you need predictable fit and familiar cutting behavior across established digital cutting workflows.

The blade is designed for route – through work and supports material thicknesses up to 18 mm with a Up Cut cut angle. The physical dimensions are 2.6875 cm long, 0.5 cm wide and 0.5 cm high, so it can be checked quickly against existing tool storage, ordering records and machine documentation.

In day-to-day production, CS-RuW5418 (Wood Bit) is especially relevant for flutes such as 2 Flutes, routing diameter such as 4, max rpm such as 50000, shank diameter such as 6 and length overall such as 64. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-RuW5418 (Wood Bit) is also listed with compatible or alternative reference terms including 42458497, BIT-WUD06-4016-64 and Kongsberg – BIT-WUD06-4016-64 (42458497). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

CS-Ru5101 (Coated)

Alex Steiner — Fri, 13 Dec 2024 20:59:18 +0000

CS-Ru5101 (Coated) is a router bit for professional digital cutting environments. Multielement multilayered rainbow coated, Super carbide, multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 6mm cutting edge diameter and max milling depth of 12mm. It is made for shops running Colex, Cosign, IECHO, Kongsberg, Multicam, Summa and Zund cutting systems, making it a practical replacement choice when you need predictable fit and familiar cutting behavior across established digital cutting workflows.

The blade is designed for route – through work and supports material thicknesses up to 12 mm with a Up Cut cut angle. The physical dimensions are 2.6875 cm long, 0.5 cm wide and 0.5 cm high, so it can be checked quickly against existing tool storage, ordering records and machine documentation.

In day-to-day production, CS-Ru5101 (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 6, max rpm such as 50000, shank diameter such as 6 and length overall such as 50. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru5101 (Coated) is also listed with compatible or alternative reference terms including 3910740, 42451070, 500-9857, BIT-AUS06-6012-50, BIT-MUS06-6012-50, CGR101, Colex T00502, CWT-ER66.3B, CWTER66.3B, CWX-ER66.3B, CWXER66.3B, ER66.3B, G000-00515 and G42451054. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

CS-Ru203e

Alex Steiner — Fri, 13 Dec 2024 20:59:17 +0000

CS-Ru203e is a router bit for professional digital cutting environments. Extended version of the Ru203. A multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 3mm cutting edge diameter and max milling depth of 22mm. If cutting metals or ACM we highly recommend our Rainbow/DLC coated 500 series. It is made for shops running Colex, Cosign, Gerber, IECHO, Kongsberg, Multicam and Summa cutting systems, making it a practical replacement choice when you need predictable fit and familiar cutting behavior across established digital cutting workflows.

The blade is designed for route – through work and supports material thicknesses up to 22 mm with a Up Cut cut angle.

In day-to-day production, CS-Ru203e is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 32000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru203e is also listed with compatible or alternative reference terms including 42449439, BIT-AUS06-3022-60 and Kongsberg BIT-AUS06-3022-60 (42449439). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

CS-Ru505 (Coated)

Alex Steiner — Fri, 13 Dec 2024 20:59:15 +0000

CS-Ru505 (Coated) is a router bit for professional digital cutting environments. Multielement multilayered “rainbow” coated, “Super” carbide, polished, multi-purpose, single O-flute, left-hand spiral (up cut) router bit with a 5mm cutting edge diameter and max milling depth of 20mm. It is made for shops running Colex, Cosign, Gerber, IECHO, Kongsberg, Multicam and Summa cutting systems, making it a practical replacement choice when you need predictable fit and familiar cutting behavior across established digital cutting workflows.

The blade is designed for route – through work and supports material thicknesses up to 20 mm with a Up Cut cut angle.

In day-to-day production, CS-Ru505 (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 5, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru505 (Coated) is also listed with compatible or alternative reference terms including 42443762, 5218139, BIT-AUS06-5022-58, CGR518U-58DC, Kongsberg BIT-AUS06-5022-58 (42443762), R505 and Zund R505 (5218139). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

CS-Ru71

Alex Steiner — Fri, 13 Dec 2024 20:59:09 +0000

CS-Ru71 is a router bit for professional digital cutting environments. Multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 1mm cutting edge diameter and max milling depth of 4mm. Shank diameter is 3mm and length overall is 30mm. It is made for shops running Colex, Cosign, IECHO, Kongsberg, Multicam, Summa and Zund cutting systems, making it a practical replacement choice when you need predictable fit and familiar cutting behavior across established digital cutting workflows.

The blade is designed for route – through work and supports material thicknesses up to 4 mm with a Up Cut cut angle.

In day-to-day production, CS-Ru71 is especially relevant for flutes such as 1 Flute, routing diameter such as 1, max rpm such as 80000, shank diameter such as 3 and length overall such as 30. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru71 is also listed with compatible or alternative reference terms including 3910752, 500-9872, r71, Summa 500-9872 and Zund R71 (3910752). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.