The blade is designed for route – through work and supports material thicknesses up to 7 mm with a Up Cut cut angle.

In day-to-day production, CS-Ru2065 is especially relevant for flutes such as 1 Flute, routing diameter such as 6.5, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru2065 is also listed with compatible or alternative reference terms including 42447715, 500-9865, 500-9874, BIT-MUS06-6012-50, BIT-MUS06-6022-64, BIT-WUD06-6025-64, CGR100, CGR101, CGR116, CGR206, Colex T00500, CWT-ER66.2B, CWTER66.2B and CWX-ER66.2B. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 8 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd553 (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd553 (Coated) is also listed with compatible or alternative reference terms including 42451104, 500-9867, BIT-MUS06-3006-50C1, CGR308U-58XO, Colex T00529, Kongsberg BIT-MUS06-3006-50C1 (42451104), Summa 500-9854, Summa 500-9867 and T00529. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – engrave work and supports material thicknesses up to 7.5 mm with a 40 degrees cut angle.

In day-to-day production, CS-E8 (Engrave) is especially relevant for flutes such as 1 Flute, routing diameter such as 6, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-E8 (Engrave) is also listed with compatible or alternative reference terms including 3910507, 42444406, BIT-EBV06-60, E7, Kongsberg BIT-EBV06-60 (42444406), XS-603E and Zund E7 (3910507). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – engrave work and supports material thicknesses up to 3 mm with a 92 degrees cut angle.

In day-to-day production, CS-E6 (Engrave) is especially relevant for flutes such as 1 Flute, routing diameter such as 6, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-E6 (Engrave) is also listed with compatible or alternative reference terms including 3910507, 42444406, BIT-EBV06-60, E7, Kongsberg BIT-EBV06-60 (42444406), XS-603E and Zund E7 (3910507). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 12 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd523 (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd523 (Coated) is also listed with compatible or alternative reference terms including CGR124D, R124 and Zund R124 (3910748). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – v-fold work and supports material thicknesses up to 5.2 mm with a 30 degrees x 2 – 60 degrees cut angle.

In day-to-day production, CS-Rv60-4FL (Coated, 30 degrees x 2) is especially relevant for flutes such as 4 flutes, routing diameter such as 6, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rv60-4FL (Coated, 30 degrees x 2) is also listed with compatible or alternative reference terms including 42459719, BIT-EBV06-60-4F and Kongsberg BIT-EBV06-60-4F ( 42459719). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 11 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd76 is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 80000, shank diameter such as 3 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd76 is also listed with compatible or alternative reference terms including 3910757, R76 and Zund R76 (3910757). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route polish work and supports material thicknesses up to 6 mm with a Up Cut cut angle.

In day-to-day production, CS-Rp106 (Diamond Polishing Bit) is especially relevant for flutes such as 2 Flutes, routing diameter such as 6, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rp106 (Diamond Polishing Bit) is also listed with compatible or alternative reference terms including 3910780, 42452169, CGP106, Kongsberg Polishing Bit (42452169), Monocrystalline diamond polish bit and Zund P106 (3910780). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 26 mm with a Straight Cut cut angle. The physical dimensions are 2.6875 cm long, 0.5 cm wide and 0.5 cm high, so it can be checked quickly against existing tool storage, ordering records and machine documentation.

In day-to-day production, CS-Rs625 is especially relevant for flutes such as 2 Flutes, routing diameter such as 6, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rs625 is also listed with compatible or alternative reference terms including 42458794, BIT-MSD06-6025-64, Kongsberg BIT-MSD06-6025-64 (42458794), X2-625S and XDS-625. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – compression work and supports material thicknesses up to 14 mm with a Compression Cut cut angle.

In day-to-day production, CS-Rc5415 (Compression) is especially relevant for flutes such as 2 Flutes, routing diameter such as 4, shank diameter such as 6, length overall such as 60 and max rpm such as 40000. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rc5415 (Compression) is also listed with compatible or alternative reference terms including 42471763, BIT-MCS06-4015-40 and Kongsberg BIT-MCS06-4015-40 (42471763). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.