The blade is designed for route – compression work and supports material thicknesses up to 14 mm with a Compression Cut cut angle.

In day-to-day production, CS-Rc5415 (Compression) is especially relevant for flutes such as 2 Flutes, routing diameter such as 4, shank diameter such as 6, length overall such as 60 and max rpm such as 40000. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rc5415 (Compression) is also listed with compatible or alternative reference terms including 42471763, BIT-MCS06-4015-40 and Kongsberg BIT-MCS06-4015-40 (42471763). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 14 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd524 (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 4, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd524 (Coated) is also listed with compatible or alternative reference terms including CGR124D, R124 and Zund R124 (3910748). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 14 mm with a Up Cut cut angle.

In day-to-day production, CS-Ru504 (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 4, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru504 (Coated) is also listed with compatible or alternative reference terms including 42451112, 42458471, 42460824, 42471722, 42471730, 42477760, 500-9868, 5218137, BIT-ACS06-4012-50, BIT-MUS06-4006-50C1, BIT-MUS06-4006-50C2, BIT-MUS06-4012-50C1, BIT-MUS06-4012-50C2 and BIT-SUS06-4020-64. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – static/drag work and supports material thicknesses up to 14 mm with a 60 cut angle and a 1.5 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools. The physical dimensions are 2.22 cm long, 1.63 cm wide and .35 cm high, so it can be checked quickly against existing tool storage, ordering records and machine documentation.

In day-to-day production, CS-K44 is especially relevant for board – soft such as Corrugated Plastic and Styrene, flexible material such as Carpet, PVC Banner and Tarpaulin and textile such as Felt. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values include a 0.58 mm start overcut and a 0.58 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K44 is also listed with compatible or alternative reference terms including 3910340, 895044, D44, DE44, Z44 and Zund Z44 (3910340). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 14 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd124 is especially relevant for flutes such as 1 Flute, routing diameter such as 4, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd124 is also listed with compatible or alternative reference terms including 3910748, 42449389, 500-9880, BIT-MDS06-4012-50, CGR124D, Colex T00501, G42449389, Kongsberg BIT-MDS06-4012-50 (42449389), PSD-418, R124, Rs204d, Summa 500-9880, T00501 and Zund R124 (3910748). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 14 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd123 is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd123 is also listed with compatible or alternative reference terms including 3910747, 42447342, 500-9866, 500-9879, BIT-ADS06-3011-50, BIT-MDS06-3011-50, CGR133D, G42443358, G42447342, Kongsberg BIT-MDS06-3011-50 (42447342), P1-312D, PSD-312, R123 and RS203D. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 14 mm with a Up Cut cut angle.

In day-to-day production, CS-Ru204 is especially relevant for flutes such as 1 Flute, routing diameter such as 4, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru204 is also listed with compatible or alternative reference terms including 3910709, 3910739, 3910744, 3910764, 3910795, 500-9856, 5209420, 5212030, BIT-MUS06-4006-50, BIT-MUS06-4012-50, BIT-WUD06-4016-64, CGR109, CGR114 and CGR154. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 14 mm with a Up Cut cut angle.

In day-to-day production, CS-Ru203 is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru203 is also listed with compatible or alternative reference terms including 3910738, 3910743, 3910761, 42437905, 500-9876, 5209419, 5212028, BIT-MUS06-3006-50, BIT-MUS06-3011-50, BIT-SUS06-3012-64, CGR113, CGR153, Colex T00538 and CWT-ER63.1A. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 14 mm with a 63 degrees + 79 degrees cut angle and a 0.63 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K22 is especially relevant for board – soft such as Corrugated Plastic, Dispa(R), F-Sorb(R), Foam Board and Fome-Cor(R), corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute, corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute, corrugated triple wall such as E/B/E Flute and flexible material such as Carpet, Cork, Ejection Rubber, Fiber Glass and Foam. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 1.2 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K22 is also listed with compatible or alternative reference terms including 3910315, 422, 42458265, 500-9810, 5009810, 895022, 9005, BLD-SF422, G42458265, i-422, i422, K22, Kongsberg BLD-SF422 (42458265) and Oscillate. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.