The blade is designed for knife – oscillate work and supports material thicknesses up to 20 mm with a 25o + 27o cut angle and a 6o mm blade thickness. The round stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K6307r is especially relevant for board – soft such as Corrugated Plastic, F-Sorb(R), Foam Board, Fome-Cor(R) and Insite(R) Foam Board, flexible material such as Carpet, Cork, Ejection Rubber, Foam and Magnetic Foil, textile such as Felt and Polyester Coated, corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute and corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values include a 0 mm start overcut and a To be defined mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K6307r is also listed with compatible or alternative reference terms including K6307r. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – static/drag work and supports material thicknesses up to 20 mm with a 45 degrees + 90 degrees cut angle and a 1.5 mm blade thickness. The round stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K46r is especially relevant for shank diameter such as 8, board – soft such as Corrugated Plastic, Foam Board, Fome-Cor(R) and Insite(R) Foam Board, film / vinyl such as 3M(R) Diamond Grade, 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber and General Formulations(R) Vinyl, flexible material such as Ejection Rubber, Foam, Gasket Material, Magnetic Foil and Magnum Magnetics and leather such as Leather Hide. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-K46r is also listed with compatible or alternative reference terms including 34143362, 8146, BLD-SR8146, K46r and Kongsberg BLD-SR8146 (34143362). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 20 mm with a Up Cut cut angle.

In day-to-day production, CS-Ru505 (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 5, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru505 (Coated) is also listed with compatible or alternative reference terms including 42443762, 5218139, BIT-AUS06-5022-58, CGR518U-58DC, Kongsberg BIT-AUS06-5022-58 (42443762), R505 and Zund R505 (5218139). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 20 mm with a 81.5 degrees cut angle and a 1.5 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K61 is especially relevant for board – soft such as Corrugated Plastic, corrugated sandwich, Dispa(R), F-Sorb(R) and Foam Board, flexible material such as Carpet, Cork, Ejection Rubber, Fiber Glass and Foam, textile such as Felt and Polyester Coated, corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute and corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 2.2 + 0.15 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K61 is also listed with compatible or alternative reference terms including 5201343, 895061, E61, IECHO E62, K61, S61, SE61, Z61 and Zund Z61 (5201343). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 20 mm with a 25o + 27o cut angle and a 6o mm blade thickness. The round stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K27rh is especially relevant for board – soft such as Corrugated Plastic, F-Sorb(R), Foam Board, Fome-Cor(R) and Insite(R) Foam Board, flexible material such as Carpet, Cork, Ejection Rubber, Foam and Magnetic Foil, textile such as Felt and Polyester Coated, corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute and corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values include a 0 mm start overcut and a To be defined mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K27rh is also listed with compatible or alternative reference terms including 42441626, BLD-SR6310, G42441626, Kongsberg BLD-SR6310 (42441626), S27r, S27rh, SE27r and SE27rh. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – static/drag work and supports material thicknesses up to 20 mm with a 45 degrees + 90 degrees cut angle and a 1.5 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools. The physical dimensions are 2.22 cm long, 1.63 cm wide and .35 cm high, so it can be checked quickly against existing tool storage, ordering records and machine documentation.

In day-to-day production, CS-K46s is especially relevant for board – rigid such as EVA – Ethylene Vinyl Acetate, Expanded PVC, HDU – High Density Urethane, Komatex(R) and Plaskolite(R), board – soft such as Corrugated Plastic, Dispa(R), F-Sorb(R), Foam Board and Fome-Cor(R), flexible material such as Carpet, Cork, Ejection Rubber, Foam and Garlock(R), folding carton such as 2XL (85pt), Extra Heavy (50pt), Light (20pt) and XL (32pt) and paper such as Extra Heavy (114-140lbs), Heavy (93-100lbs), Light (22-56lbs) and Medium (65-82lbs). These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 1 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K46s is also listed with compatible or alternative reference terms including 003612-MC246, 246, 42458398, 895246, 9012, BLD-SF246, Colex T00330, G000-00522, G42458398, i-246, i246, Kongsberg BLD-SF246 (42458398), S246 and se246. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – static/drag work and supports material thicknesses up to 20 mm with a 45 degrees + 90 degrees cut angle and a 1.5 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools. The physical dimensions are 2.22 cm long, 1.63 cm wide and .35 cm high, so it can be checked quickly against existing tool storage, ordering records and machine documentation.

In day-to-day production, CS-K46 is especially relevant for board – soft such as Corrugated Plastic, Dispa(R), F-Sorb(R), Foam Board and Fome-Cor(R), board – rigid such as EVA – Ethylene Vinyl Acetate, Expanded PVC, HDU – High Density Urethane, Komatex(R) and Plaskolite(R), flexible material such as Carpet, Cork, Ejection Rubber, Fiber Glass and Foam, folding carton such as 2XL (85pt), Extra Heavy (50pt), Light (20pt) and XL (32pt) and paper such as Extra Heavy (114-140lbs), Heavy (93-100lbs), Light (22-56lbs) and Medium (65-82lbs). These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 1 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K46 is also listed with compatible or alternative reference terms including 346, 42458406, 4800073, 500-9807, 895346, 9013, BLD-SF346, CWT-E46, CWTE46, CWX-E46, CWXE46, E46, G42458406 and i-346. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.