The blade is designed for route – through work and supports material thicknesses up to 32 mm with a Up Cut cut angle.

In day-to-day production, CS-Ru156 is especially relevant for flutes such as 1 Flute, routing diameter such as 6, max rpm such as 50000, shank diameter such as 6 and length overall such as 64. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru156 is also listed with compatible or alternative reference terms including 3910710, 42438077, BIT-MUS06-6032-64, CGR156, Colex T00503, ER66.3C, IECHO ER66.3C, Kongsberg BIT-MUS06-6032-64 (42438077), PSU-2599, R156, R172, T00503 and Zund R156 (3910710). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 7 mm with a Up Cut cut angle.

In day-to-day production, CS-Ru2065 is especially relevant for flutes such as 1 Flute, routing diameter such as 6.5, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru2065 is also listed with compatible or alternative reference terms including 42447715, 500-9865, 500-9874, BIT-MUS06-6012-50, BIT-MUS06-6022-64, BIT-WUD06-6025-64, CGR100, CGR101, CGR116, CGR206, Colex T00500, CWT-ER66.2B, CWTER66.2B and CWX-ER66.2B. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work with a Down Cut cut angle.

In day-to-day production, CS-Rd126-A is especially relevant for flutes such as 1 Flute, routing diameter such as 6, max rpm such as 50000, max cut length such as 22 and shank diameter such as 6. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd126-A is a suitable option when the product name, machine compatibility and material information match the blade already used in production. Always confirm the selected blade against your machine setup and the material being processed before running a full job.

The blade is designed for route – through work and supports material thicknesses up to 8 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd553 (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd553 (Coated) is also listed with compatible or alternative reference terms including 42451104, 500-9867, BIT-MUS06-3006-50C1, CGR308U-58XO, Colex T00529, Kongsberg BIT-MUS06-3006-50C1 (42451104), Summa 500-9854, Summa 500-9867 and T00529. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work with a Up Cut cut angle.

In day-to-day production, CS-Ru117e is especially relevant for flutes such as 1 Flute, routing diameter such as 6, max rpm such as 50000, max cut length such as 28 and shank diameter such as 6. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru117e is also listed with compatible or alternative reference terms including 3910771, CWT-ER66.3B, CWTER66.3B, CWX-ER66.3B, CWXER66.3B, ER66.3B, G000-00516, IECHO ER66.3B, R117 and Zund R117 (3910771). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 12 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd523 (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd523 (Coated) is also listed with compatible or alternative reference terms including CGR124D, R124 and Zund R124 (3910748). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work with a Up Cut cut angle.

In day-to-day production, CS-Ru117e-A is especially relevant for flutes such as 1 Flute, routing diameter such as 6, max rpm such as 50000, max cut length such as 28 and shank diameter such as 6. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru117e-A is also listed with compatible or alternative reference terms including 3910771, CWT-ER66.3B, CWTER66.3B, CWX-ER66.3B, CWXER66.3B, ER66.3B, G000-00516, IECHO ER66.3B, R117 and Zund R117 (3910771). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work with a Up Cut cut angle. The physical dimensions are 2.6875 cm long, 0.5 cm wide and 0.5 cm high, so it can be checked quickly against existing tool storage, ordering records and machine documentation.

In day-to-day production, CS-RuW5418-A (Wood Bit) is especially relevant for flutes such as 2 Flutes, routing diameter such as 4, max cut length such as 18, max rpm such as 50000 and shank diameter such as 6. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-RuW5418-A (Wood Bit) is also listed with compatible or alternative reference terms including 42458497, BIT-WUD06-4016-64 and Kongsberg – BIT-WUD06-4016-64 (42458497). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work with a Straight Cut cut angle. The physical dimensions are 2.6875 cm long, 0.5 cm wide and 0.5 cm high, so it can be checked quickly against existing tool storage, ordering records and machine documentation.

In day-to-day production, CS-Rs625-A is especially relevant for flutes such as 2 Flutes, routing diameter such as 6, max cut length such as 26, max rpm such as 50000 and shank diameter such as 6. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rs625-A is also listed with compatible or alternative reference terms including ARC. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work with a Down Cut cut angle.

In day-to-day production, CS-Rd526-A (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 6, max rpm such as 50000, max cut length such as 13 and shank diameter such as 6. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd526-A (Coated) is a suitable option when the product name, machine compatibility and material information match the blade already used in production. Always confirm the selected blade against your machine setup and the material being processed before running a full job.