Route – V-Fold – Cutter Supplies ApS

CS-Rv142-2FL (Flat Tip, 45° x 2)

Katrine — Mon, 03 Mar 2025 13:05:10 +0000

CS-Rv142-2FL (Flat Tip, 45 degrees x 2) is a router bits > v-cut bit for professional digital cutting environments. Brazed carbide, 2-flute, 90 degrees angle, v-cut router bit with a 12mm cutting edge diameter and max milling depth of 9mm. Has 2 flutes with 45 degrees angles which creates a 90 degrees v-cut angle. Tip is ground flat to allow for folding of ACM (Aluminum Composite Panels) materials. It is made for shops running Cosign, Kongsberg, Summa and Zund cutting systems, making it a practical replacement choice when you need predictable fit and familiar cutting behavior across established digital cutting workflows.

The blade is designed for route – v-fold work and supports material thicknesses up to 9 mm.

In day-to-day production, CS-Rv142-2FL (Flat Tip, 45 degrees x 2) is intended for the material range shown in the product data and can be used as part of a controlled blade setup where the operator confirms tool choice against the material, table and cutting parameters.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rv142-2FL (Flat Tip, 45 degrees x 2) is a suitable option when the product name, machine compatibility and material information match the blade already used in production. Always confirm the selected blade against your machine setup and the material being processed before running a full job.

CS-Rv60-4FL-A (Coated, 30° x 2)

Alex Steiner — Fri, 13 Dec 2024 22:27:14 +0000

CS-Rv60-4FL-A (Coated, 30 degrees x 2) is a router bits > v-cut bit for professional digital cutting environments. “Super” carbide, coated, 4-flute, V-cut router bit with a 6mm cutting edge diameter and max milling depth of 5.2mm. Has 4 flutes with 30? angles which creates a 60? v-cut angle. With stop ring (for use with the Zund ARC system and IECHO Tool Changer). It is made for shops running IECHO and Zund cutting systems, making it a practical replacement choice when you need predictable fit and familiar cutting behavior across established digital cutting workflows.

The blade is designed for route – v-fold work with a 30 degrees x 2 – 60 degrees cut angle.

In day-to-day production, CS-Rv60-4FL-A (Coated, 30 degrees x 2) is especially relevant for flutes such as 4 flutes, routing diameter such as 6, max rpm such as 50000, max cut length such as 5.2 and shank diameter such as 6. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rv60-4FL-A (Coated, 30 degrees x 2) is also listed with compatible or alternative reference terms including 42459719, BIT-EBV06-60-4F and Kongsberg BIT-EBV06-60-4F ( 42459719). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

CS-Rv141-A (Coated)

Alex Steiner — Fri, 13 Dec 2024 22:27:06 +0000

CS-Rv141-A (Coated) is a router bits > v-cut bit for professional digital cutting environments. “Super” carbide, coated, 2-flute, V-cut router bit with a 10mm cutting edge diameter and max milling depth of 5mm. With stop ring (for use with the Zund ARC system and IECHO Tool Changer). It is made for shops running IECHO and Zund cutting systems, making it a practical replacement choice when you need predictable fit and familiar cutting behavior across established digital cutting workflows.

The blade is designed for route – v-fold work with a 90 degrees cut angle.

In day-to-day production, CS-Rv141-A (Coated) is especially relevant for flutes such as 2 Flutes, routing diameter such as 10, max rpm such as 40000, max cut length such as 5 and shank diameter such as 6. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rv141-A (Coated) is also listed with compatible or alternative reference terms including 5211751, ER6C4 45 degrees, IECHO ER6C4 45 degrees, R141-A and Zund R141-A (5211751). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

CS-Rv60-4FL (Coated, 30° x 2)

Alex Steiner — Fri, 13 Dec 2024 20:59:42 +0000

CS-Rv60-4FL (Coated, 30 degrees x 2) is a router bits > v-cut bit for professional digital cutting environments. “Super” carbide, coated, 4-flute, V-cut router bit with a 6mm cutting edge diameter and max milling depth of 5.2mm. Has 4 flutes with 30? angles which creates a 60? v-cut angle. It is made for shops running Colex, Gerber, IECHO, Kongsberg, Multicam, Summa and Zund cutting systems, making it a practical replacement choice when you need predictable fit and familiar cutting behavior across established digital cutting workflows.

The blade is designed for route – v-fold work and supports material thicknesses up to 5.2 mm with a 30 degrees x 2 – 60 degrees cut angle.

In day-to-day production, CS-Rv60-4FL (Coated, 30 degrees x 2) is especially relevant for flutes such as 4 flutes, routing diameter such as 6, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rv60-4FL (Coated, 30 degrees x 2) is also listed with compatible or alternative reference terms including 42459719, BIT-EBV06-60-4F and Kongsberg BIT-EBV06-60-4F ( 42459719). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

CS-Rv141 (Coated)

Alex Steiner — Fri, 13 Dec 2024 20:58:55 +0000

CS-Rv141 (Coated) is a router bits > v-cut bit for professional digital cutting environments. “Super” carbide, coated, 2-flute, V-cut router bit with a 10mm cutting edge diameter and max milling depth of 5mm. It is made for shops running Colex, Gerber, IECHO, Kongsberg, Multicam, Summa and Zund cutting systems, making it a practical replacement choice when you need predictable fit and familiar cutting behavior across established digital cutting workflows.

The blade is designed for route – v-fold work and supports material thicknesses up to 5 mm with a 90 degrees cut angle.

In day-to-day production, CS-Rv141 (Coated) is especially relevant for flutes such as 2 Flutes, routing diameter such as 10, max rpm such as 40000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rv141 (Coated) is also listed with compatible or alternative reference terms including 3910799, 42475905, 500-9863, BIT-EBV06-90/16-2F, CGR141, Colex T00545, ER6C4 45 degrees, IECHO ER6C4 45 degrees, Kongsberg BIT-EBV06-90/16-2F (42475905), R141, Summa 500-9863 and Zund R141 (3910799). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.