The blade is designed for route – through work and supports material thicknesses up to 8 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd553 (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd553 (Coated) is also listed with compatible or alternative reference terms including 42451104, 500-9867, BIT-MUS06-3006-50C1, CGR308U-58XO, Colex T00529, Kongsberg BIT-MUS06-3006-50C1 (42451104), Summa 500-9854, Summa 500-9867 and T00529. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 12 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd523 (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd523 (Coated) is also listed with compatible or alternative reference terms including CGR124D, R124 and Zund R124 (3910748). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work with a Down Cut cut angle.

In day-to-day production, CS-Rd123-A is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 50000, max cut length such as 14 and shank diameter such as 6. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd123-A is also listed with compatible or alternative reference terms including 5211741, ER63.1A, IECHO ER63.1A, R123-A and Zund R123-A (5211741). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work with a Up Cut cut angle.

In day-to-day production, CS-Ru553-A (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 50000, max cut length such as 8 and shank diameter such as 6. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru553-A (Coated) is also listed with compatible or alternative reference terms including ARC. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work with a Up Cut cut angle.

In day-to-day production, CS-Ru503-A (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 50000, max cut length such as 11 and shank diameter such as 6. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru503-A (Coated) is also listed with compatible or alternative reference terms including 5218136, CWT-ER63.1C, CWTER63.1C, CWX-ER63.1C, CWXER63.1C, IECHO ER63.1C, R503-A and Zund R503-A (5218136). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work with a Up Cut cut angle.

In day-to-day production, CS-Ru208-A (Coated, Polished) is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 50000, max cut length such as 8 and shank diameter such as 6. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru208-A (Coated, Polished) is also listed with compatible or alternative reference terms including 5212254, ACM, R208-A, Rs208a and Zund R208-A (5212254). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work with a Up Cut cut angle.

In day-to-day production, CS-Ru203-A is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 50000, max cut length such as 14 and shank diameter such as 6. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru203-A is also listed with compatible or alternative reference terms including 5211435, ARC, CWT-ER63.1A, CWTER63.1A, CWX-ER63.1A, CWXER63.1A, ER63.1A, IECHO ER63.1A, R203-A, R203A and Zund R203-A (5211435). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 11 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd76 is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 80000, shank diameter such as 3 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd76 is also listed with compatible or alternative reference terms including 3910757, R76 and Zund R76 (3910757). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 22 mm with a Up Cut cut angle.

In day-to-day production, CS-Ru203e is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 32000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru203e is also listed with compatible or alternative reference terms including 42449439, BIT-AUS06-3022-60 and Kongsberg BIT-AUS06-3022-60 (42449439). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 8 mm with a Up Cut cut angle.

In day-to-day production, CS-Ru553 (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 3, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru553 (Coated) is also listed with compatible or alternative reference terms including 42451104, 500-9867, BIT-MUS06-3006-50C1, CGR308U-58XO, Colex T00529, Kongsberg BIT-MUS06-3006-50C1 (42451104), Summa 500-9854, Summa 500-9867 and T00529. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.