The blade is designed for route – through work with a Up Cut cut angle. The physical dimensions are 2.6875 cm long, 0.5 cm wide and 0.5 cm high, so it can be checked quickly against existing tool storage, ordering records and machine documentation.

In day-to-day production, CS-RuW5418-A (Wood Bit) is especially relevant for flutes such as 2 Flutes, routing diameter such as 4, max cut length such as 18, max rpm such as 50000 and shank diameter such as 6. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-RuW5418-A (Wood Bit) is also listed with compatible or alternative reference terms including 42458497, BIT-WUD06-4016-64 and Kongsberg – BIT-WUD06-4016-64 (42458497). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – compression work with a Compression Cut cut angle.

In day-to-day production, CS-Rc5415-A (Compression) is especially relevant for flutes such as 2 Flutes, routing diameter such as 4, max cut length such as 14, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rc5415-A (Compression) is a suitable option when the product name, machine compatibility and material information match the blade already used in production. Always confirm the selected blade against your machine setup and the material being processed before running a full job.

The blade is designed for route – through work with a Down Cut cut angle.

In day-to-day production, CS-Rd124-A is especially relevant for flutes such as 1 Flute, routing diameter such as 4, max rpm such as 50000, max cut length such as 14 and shank diameter such as 6. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd124-A is also listed with compatible or alternative reference terms including 5211742, ER64.1A, IECHO ER64.1A, R124-A and Zund R124-A (5211742). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work with a Down Cut cut angle.

In day-to-day production, CS-Rd524-A (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 4, max rpm such as 50000, max cut length such as 14 and shank diameter such as 6. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd524-A (Coated) is also listed with compatible or alternative reference terms including 5211742, R124-A and Zund R124-A (5211742). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work with a Up Cut cut angle.

In day-to-day production, CS-Ru504-A (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 4, max rpm such as 50000, max cut length such as 14 and shank diameter such as 6. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru504-A (Coated) is also listed with compatible or alternative reference terms including 5218138, R504-A and Zund R504-A (5218138). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work with a Up Cut cut angle.

In day-to-day production, CS-Ru209-A (Coated, Polished) is especially relevant for flutes such as 1 Flute, routing diameter such as 4, max rpm such as 50000, max cut length such as 8 and shank diameter such as 6. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru209-A (Coated, Polished) is also listed with compatible or alternative reference terms including 5212255, ACM, R209-A and Zund R209-A (5212255). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work with a Up Cut cut angle.

In day-to-day production, CS-Ru204-A is especially relevant for flutes such as 1 Flute, routing diameter such as 4, max rpm such as 50000, max cut length such as 14 and shank diameter such as 6. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru204-A is also listed with compatible or alternative reference terms including 5211436, ARC, R204-A, R204A and Zund R204-A (5211436). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 18 mm with a Up Cut cut angle. The physical dimensions are 2.6875 cm long, 0.5 cm wide and 0.5 cm high, so it can be checked quickly against existing tool storage, ordering records and machine documentation.

In day-to-day production, CS-RuW5418 (Wood Bit) is especially relevant for flutes such as 2 Flutes, routing diameter such as 4, max rpm such as 50000, shank diameter such as 6 and length overall such as 64. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-RuW5418 (Wood Bit) is also listed with compatible or alternative reference terms including 42458497, BIT-WUD06-4016-64 and Kongsberg – BIT-WUD06-4016-64 (42458497). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – compression work and supports material thicknesses up to 14 mm with a Compression Cut cut angle.

In day-to-day production, CS-Rc5415 (Compression) is especially relevant for flutes such as 2 Flutes, routing diameter such as 4, shank diameter such as 6, length overall such as 60 and max rpm such as 40000. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rc5415 (Compression) is also listed with compatible or alternative reference terms including 42471763, BIT-MCS06-4015-40 and Kongsberg BIT-MCS06-4015-40 (42471763). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for route – through work and supports material thicknesses up to 14 mm with a Down Cut cut angle.

In day-to-day production, CS-Rd524 (Coated) is especially relevant for flutes such as 1 Flute, routing diameter such as 4, max rpm such as 50000, shank diameter such as 6 and length overall such as 60. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Rd524 (Coated) is also listed with compatible or alternative reference terms including CGR124D, R124 and Zund R124 (3910748). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.