The blade is designed for knife – static/drag work and supports material thicknesses up to 30 mm and a 0.9 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K641 is especially relevant for board – soft such as Reboard(R), corrugated single such as A Flute, B Flute and C Flute, corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute and corrugated triple wall such as E/B/E Flute. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a To be defined mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K641 is also listed with compatible or alternative reference terms including BLD-SF641 and Kongsberg BLD-SF641. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 35 mm with a 85 degrees cut angle and a 0.75 mm blade thickness. The round stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K7395 is especially relevant for board – soft such as F-Sorb(R), Foam Board, Fome-Cor(R), Insite(R) Foam Board and Reboard(R), corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute, corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute, corrugated triple wall such as E/B/E Flute and flexible material such as Foam. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-K7395 is also listed with compatible or alternative reference terms including 7395 and Aristo 7395. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate, knife – static/drag work and supports material thicknesses up to 11 mm and a 0.63 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K104 is especially relevant for board – soft such as Corrugated Plastic, Dispa(R), F-Sorb(R), Foam Board and Fome-Cor(R), composite such as Armid Dry Fiber, Dry Carbon Fiber, Dry Glass Fiber, Nomex(R) Dry Fiber and Prepreg Carbon Fiber, corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute, corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute and corrugated triple wall such as E/B/E Flute. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-K104 is also listed with compatible or alternative reference terms including Z104 and Zund Z104. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 52 mm with a 60 degrees+88 degrees cut angle and a 1.5 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K64e is especially relevant for board – soft such as Corrugated Plastic, corrugated sandwich, Dispa(R), F-Sorb(R) and Foam Board, flexible material such as Carpet, Cork, Ejection Rubber, Fiber Glass and Foam, textile such as Felt, corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute and corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 3.5 + 0.03 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K64e is also listed with compatible or alternative reference terms including 5002739, S64, SE64, Z64 and Zund Z64 (5002739). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 20 mm with a 25o + 27o cut angle and a 6o mm blade thickness. The round stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K6307r is especially relevant for board – soft such as Corrugated Plastic, F-Sorb(R), Foam Board, Fome-Cor(R) and Insite(R) Foam Board, flexible material such as Carpet, Cork, Ejection Rubber, Foam and Magnetic Foil, textile such as Felt and Polyester Coated, corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute and corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values include a 0 mm start overcut and a To be defined mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K6307r is also listed with compatible or alternative reference terms including K6307r. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – v-cut work and supports material thicknesses up to 16 mm and a 0.6 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K572 is especially relevant for board – soft such as Corrugated Plastic, corrugated sandwich, Dispa(R), F-Sorb(R) and Foam Board, corrugated single such as A Flute, B Flute and C Flute, corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute, corrugated triple wall such as A/B/A Flute and E/B/E Flute and flexible material such as Carpet, Cork and Foam. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-K572 is also listed with compatible or alternative reference terms including 34102988, BLD-DF572, Kongsberg BLD-DF572 (34102988), v-cut and vcut. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – v-cut work and supports material thicknesses up to 16 mm and a 0.6 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K571 is especially relevant for board – soft such as Corrugated Plastic, Dispa(R), F-Sorb(R), Foam Board and Fome-Cor(R), corrugated single such as A Flute, B Flute and C Flute, corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute, corrugated triple wall such as A/B/A Flute and E/B/E Flute and flexible material such as Carpet, Cork and Foam. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-K571 is also listed with compatible or alternative reference terms including 42460766, BLD-DF571, Kongsberg BLD-DF571 (42460766), v-cut and vcut. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 16.5 mm with a 55 degrees + 81.5 degrees cut angle and a 1.5 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K60 is especially relevant for board – soft such as Corrugated Plastic, Dispa(R), F-Sorb(R), Foam Board and Fome-Cor(R), corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute, corrugated single such as A Flute, B Flute and C Flute, corrugated triple wall such as E/B/E Flute and flexible material such as Carpet, Cork, Ejection Rubber, Fiber Glass and Foam. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 2.2mm + 0.15mm mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K60 is also listed with compatible or alternative reference terms including 5201345, SE60, Z60 and Zund Z60 (5201345). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – v-cut work and supports material thicknesses up to 12 mm and a 0.6 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K561 is especially relevant for board – soft such as Corrugated Plastic, corrugated sandwich, Dispa(R), F-Sorb(R) and Foam Board, corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute, corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute and corrugated triple wall such as A/B/A Flute and E/B/E Flute. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-K561 is also listed with compatible or alternative reference terms including 34111716, BLD-DF561 and Kongsberg BLD-DF561 (34111716). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 29 mm with a 83 degrees + 5 degrees cut angle and a 1.5 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K68 is especially relevant for board – soft such as Corrugated Plastic, corrugated sandwich, Dispa(R), F-Sorb(R) and Foam Board, corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute, corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute, corrugated triple wall such as A/B/A Flute and E/B/E Flute and composite such as Armid Dry Fiber, Dry Carbon Fiber, Dry Glass Fiber and Nomex(R) Dry Fiber. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 1.9 + 0.12 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K68 is also listed with compatible or alternative reference terms including 5204301, S68, SE68 and Zund Z68 (5204301). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.