The blade is designed for knife – oscillate, knife – static/drag work and supports material thicknesses up to 12 mm with a 65 cut angle and a 0.63 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K9801 is especially relevant for corrugated single such as E Flute, F Flute and G Flute, board – soft such as Corrugated Plastic, Dispa(R), Foam Board, Fome-Cor(R) and Insite(R) Foam Board, film / vinyl such as 3M(R) Diamond Grade, 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber and General Formulations(R) Vinyl, flexible material such as Foam, Magnetic Foil, Magnum Magnetics, PTFE and PVC Banner and folding carton such as 2XL (85pt), Extra Heavy (50pt), Light (20pt) and XL (32pt). These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-K9801 is also listed with compatible or alternative reference terms including 500-9801, 9801, Oscillate and Summa 500-9801. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – kiss-cut work and supports material thicknesses up to 0.25 mm with a 36 degrees cut angle. The round stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K360 is especially relevant for film / vinyl such as 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber, General Formulations(R) Vinyl and Ploycarbonate Film, flexible material such as Magnetic Foil and stock type such as Round Stock. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values include a 0 mm start overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K360 is also listed with compatible or alternative reference terms including 360, 391-360 and Summa 391-360. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – kiss-cut work and supports material thicknesses up to 1.2 mm with a 60 degrees cut angle. The round stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K560 is especially relevant for film / vinyl such as 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber, General Formulations(R) Vinyl and Ploycarbonate Film, flexible material such as Magnetic Foil and stock type such as Round Stock. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values include a 0 mm start overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K560 is also listed with compatible or alternative reference terms including 390-550, 390550 and Summa 390-550. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – kiss-cut work and supports material thicknesses up to 0.25 mm with a 36 degrees cut angle. The round stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K534 is especially relevant for film / vinyl such as 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber, General Formulations(R) Vinyl and Ploycarbonate Film, flexible material such as Magnetic Foil and stock type such as Round Stock. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values include a 0 mm start overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K534 is also listed with compatible or alternative reference terms including 390-534, 390534 and Summa 390-534. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – kiss-cut work and supports material thicknesses up to 1.5 mm with a 30 degrees + 60 degrees cut angle and a 3o mm blade thickness. The round stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K6 is especially relevant for film / vinyl such as 3M(R) Diamond Grade, 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber and General Formulations(R) Vinyl. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 1.73 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K6 is also listed with compatible or alternative reference terms including 5223298, z6 and zund z6 (5223298). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate, knife – static/drag work and supports material thicknesses up to 7.4 mm with a 53.2 degrees cut angle and a 0.63 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools. The physical dimensions are 2.22 cm long, 1.63 cm wide and .35 cm high, so it can be checked quickly against existing tool storage, ordering records and machine documentation.

In day-to-day production, CS-K16a (Asymmetrical) is especially relevant for board – soft such as Corrugated Plastic, Dispa(R), Foam Board, Fome-Cor(R) and Insite(R) Foam Board, composite such as Prepreg Carbon Fiber, Prepreg Quartz, Prepreg Unidirectional Carbon Fiber and Toray(R) Prepreg Carbon Fiber, corrugated single such as E Flute, F Flute and G Flute, film / vinyl such as 3M(R) Diamond Grade, 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber and General Formulations(R) Vinyl and flexible material such as Cork, Foam, Garlock(R), Gasket Material and Magnetic Foil. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 0.75 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K16a (Asymmetrical) is also listed with compatible or alternative reference terms including asymmetrical. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – kiss-cut work and supports material thicknesses up to 2.1 mm and a 3o mm blade thickness. The round stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K7 is especially relevant for film / vinyl such as 3M(R) Diamond Grade, 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber and General Formulations(R) Vinyl and flexible material such as Magnetic Foil, Magnum Magnetics, PTFE, PVC Banner and Tarpaulin. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values include a 0.1 mm start overcut and a ‘-0.03+0.7 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K7 is also listed with compatible or alternative reference terms including 5224068, Z7 and Zund Z7 (5224068). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – static/drag work and supports material thicknesses up to 5 mm with a 35o cut angle and a 0.63 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools. The physical dimensions are 2.6 cm long, 1.4 cm wide and .65 cm high, so it can be checked quickly against existing tool storage, ordering records and machine documentation.

In day-to-day production, CS-K-HS10 (ten pack) is especially relevant for board – soft such as Corrugated Plastic, Dispa(R), F-Sorb(R), Foam Board and Fome-Cor(R), corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute, paper such as Extra Heavy (114-140lbs), Heavy (93-100lbs), Light (22-56lbs) and Medium (65-82lbs), folding carton such as Light (20pt) and XL (32pt) and flexible material such as Carpet, Cork, Magnetic Foil, Magnum Magnetics and Tarpaulin. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-K-HS10 (ten pack) is also listed with compatible or alternative reference terms including 3910310, 894010, Cut, HS10, type 6 and Zund – Type 6 (3910310). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – kiss-cut work and supports material thicknesses up to 2.4 mm with a 30 degrees + 60 degrees cut angle and a 3o mm blade thickness. The round stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-Kw6 is especially relevant for film / vinyl such as 3M(R) Diamond Grade, 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber and General Formulations(R) Vinyl. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 1.73 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-Kw6 is also listed with compatible or alternative reference terms including 3910154, 42458349, 895006, 9028, BLD-KC154, G42458349, KC6, Kongsberg BLD-KC154 (42458349), W6 and Zund W6 (3910154). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – kiss-cut work and supports material thicknesses up to 1.2 mm with a 60 degrees cut angle. The round stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K550 is especially relevant for film / vinyl such as 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber, General Formulations(R) Vinyl and Ploycarbonate Film, flexible material such as Magnetic Foil and stock type such as Round Stock. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values include a 0 mm start overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K550 is also listed with compatible or alternative reference terms including 390-550, 390550 and Summa 390-550. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.