The blade is designed for knife – oscillate, knife – static/drag work and supports material thicknesses up to 12 mm with a 65 cut angle and a 0.63 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K9801 is especially relevant for corrugated single such as E Flute, F Flute and G Flute, board – soft such as Corrugated Plastic, Dispa(R), Foam Board, Fome-Cor(R) and Insite(R) Foam Board, film / vinyl such as 3M(R) Diamond Grade, 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber and General Formulations(R) Vinyl, flexible material such as Foam, Magnetic Foil, Magnum Magnetics, PTFE and PVC Banner and folding carton such as 2XL (85pt), Extra Heavy (50pt), Light (20pt) and XL (32pt). These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-K9801 is also listed with compatible or alternative reference terms including 500-9801, 9801, Oscillate and Summa 500-9801. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 35 mm with a 85 degrees cut angle and a 0.75 mm blade thickness. The round stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K7395 is especially relevant for board – soft such as F-Sorb(R), Foam Board, Fome-Cor(R), Insite(R) Foam Board and Reboard(R), corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute, corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute, corrugated triple wall such as E/B/E Flute and flexible material such as Foam. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-K7395 is also listed with compatible or alternative reference terms including 7395 and Aristo 7395. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate, knife – static/drag work and supports material thicknesses up to 11 mm and a 0.63 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K104 is especially relevant for board – soft such as Corrugated Plastic, Dispa(R), F-Sorb(R), Foam Board and Fome-Cor(R), composite such as Armid Dry Fiber, Dry Carbon Fiber, Dry Glass Fiber, Nomex(R) Dry Fiber and Prepreg Carbon Fiber, corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute, corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute and corrugated triple wall such as E/B/E Flute. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-K104 is also listed with compatible or alternative reference terms including Z104 and Zund Z104. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – static/drag work and supports material thicknesses up to 20 mm with a 45 degrees + 90 degrees cut angle and a 1.5 mm blade thickness. The round stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K46r is especially relevant for shank diameter such as 8, board – soft such as Corrugated Plastic, Foam Board, Fome-Cor(R) and Insite(R) Foam Board, film / vinyl such as 3M(R) Diamond Grade, 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber and General Formulations(R) Vinyl, flexible material such as Ejection Rubber, Foam, Gasket Material, Magnetic Foil and Magnum Magnetics and leather such as Leather Hide. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-K46r is also listed with compatible or alternative reference terms including 34143362, 8146, BLD-SR8146, K46r and Kongsberg BLD-SR8146 (34143362). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate, knife – static/drag work and supports material thicknesses up to 7.4 mm with a 53.2 degrees cut angle and a 0.63 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools. The physical dimensions are 2.22 cm long, 1.63 cm wide and .35 cm high, so it can be checked quickly against existing tool storage, ordering records and machine documentation.

In day-to-day production, CS-K16a (Asymmetrical) is especially relevant for board – soft such as Corrugated Plastic, Dispa(R), Foam Board, Fome-Cor(R) and Insite(R) Foam Board, composite such as Prepreg Carbon Fiber, Prepreg Quartz, Prepreg Unidirectional Carbon Fiber and Toray(R) Prepreg Carbon Fiber, corrugated single such as E Flute, F Flute and G Flute, film / vinyl such as 3M(R) Diamond Grade, 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber and General Formulations(R) Vinyl and flexible material such as Cork, Foam, Garlock(R), Gasket Material and Magnetic Foil. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 0.75 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K16a (Asymmetrical) is also listed with compatible or alternative reference terms including asymmetrical. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – static/drag work and supports material thicknesses up to 5 mm with a 35o cut angle and a 0.63 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools. The physical dimensions are 2.6 cm long, 1.4 cm wide and .65 cm high, so it can be checked quickly against existing tool storage, ordering records and machine documentation.

In day-to-day production, CS-K-HS10 (ten pack) is especially relevant for board – soft such as Corrugated Plastic, Dispa(R), F-Sorb(R), Foam Board and Fome-Cor(R), corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute, paper such as Extra Heavy (114-140lbs), Heavy (93-100lbs), Light (22-56lbs) and Medium (65-82lbs), folding carton such as Light (20pt) and XL (32pt) and flexible material such as Carpet, Cork, Magnetic Foil, Magnum Magnetics and Tarpaulin. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-K-HS10 (ten pack) is also listed with compatible or alternative reference terms including 3910310, 894010, Cut, HS10, type 6 and Zund – Type 6 (3910310). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – static/drag work and supports material thicknesses up to 8 mm with a 45 degrees cut angle and a 8o mm blade thickness. The round stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K8140r is especially relevant for board – soft such as Corrugated Plastic, Foam Board, Fome-Cor(R) and Insite(R) Foam Board, film / vinyl such as 3M(R) Diamond Grade, 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber and General Formulations(R) Vinyl, flexible material such as Ejection Rubber, Foam, Gasket Material, Magnetic Foil and Magnum Magnetics, leather such as Leather Hide and textile such as Felt and Polyester Coated. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-K8140r is also listed with compatible or alternative reference terms including 42455899, 8140, 9612, BLD-SR8140, G42455899, Kongsberg BLD-SR8140 (42455899), roundstock, S18R and SE18R. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate, knife – static/drag work and supports material thicknesses up to 12 mm with a 65 degrees cut angle and a 6o mm blade thickness. The round stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K17rh is especially relevant for board – soft such as Corrugated Plastic, Foam Board, Fome-Cor(R) and Insite(R) Foam Board, film / vinyl such as 3M(R) Diamond Grade, 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber and General Formulations(R) Vinyl, flexible material such as Ejection Rubber, Foam, Gasket Material, Magnetic Foil and Magnum Magnetics, leather such as Leather Hide and textile such as Felt and Polyester Coated. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values include a 0 mm start overcut and a 0.47 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K17rh is also listed with compatible or alternative reference terms including 42437293, 9038, BLD-SR6223, K223r, K224r, Kongsberg BLD-SR6223 (42437293), Oscillate, round stock and SE17RH. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate, knife – static/drag work and supports material thicknesses up to 12 mm with a 65 degrees cut angle and a 6o mm blade thickness. The round stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K17r is especially relevant for board – soft such as Corrugated Plastic, Foam Board, Fome-Cor(R) and Insite(R) Foam Board, film / vinyl such as 3M(R) Diamond Grade, 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber and General Formulations(R) Vinyl, flexible material such as Ejection Rubber, Foam, Gasket Material, Magnetic Foil and Magnum Magnetics, leather such as Leather Hide and textile such as Felt and Polyester Coated. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values include a 0 mm start overcut and a 0.47 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K17r is also listed with compatible or alternative reference terms including 42438135, 6224, 9038, BLD-SR6224, G42438135, i-7703, i-7704, i7703, i7704, K223r, Kongsberg BLD-SR6224 (42438135), Oscillate, round stock and S17R. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – static/drag work and supports material thicknesses up to 20 mm with a 45 degrees + 90 degrees cut angle and a 1.5 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools. The physical dimensions are 2.22 cm long, 1.63 cm wide and .35 cm high, so it can be checked quickly against existing tool storage, ordering records and machine documentation.

In day-to-day production, CS-K46s is especially relevant for board – rigid such as EVA – Ethylene Vinyl Acetate, Expanded PVC, HDU – High Density Urethane, Komatex(R) and Plaskolite(R), board – soft such as Corrugated Plastic, Dispa(R), F-Sorb(R), Foam Board and Fome-Cor(R), flexible material such as Carpet, Cork, Ejection Rubber, Foam and Garlock(R), folding carton such as 2XL (85pt), Extra Heavy (50pt), Light (20pt) and XL (32pt) and paper such as Extra Heavy (114-140lbs), Heavy (93-100lbs), Light (22-56lbs) and Medium (65-82lbs). These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 1 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K46s is also listed with compatible or alternative reference terms including 003612-MC246, 246, 42458398, 895246, 9012, BLD-SF246, Colex T00330, G000-00522, G42458398, i-246, i246, Kongsberg BLD-SF246 (42458398), S246 and se246. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.