The blade is designed for knife – oscillate, knife – static/drag work and supports material thicknesses up to 12 mm with a 65 cut angle and a 0.63 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K9801 is especially relevant for corrugated single such as E Flute, F Flute and G Flute, board – soft such as Corrugated Plastic, Dispa(R), Foam Board, Fome-Cor(R) and Insite(R) Foam Board, film / vinyl such as 3M(R) Diamond Grade, 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber and General Formulations(R) Vinyl, flexible material such as Foam, Magnetic Foil, Magnum Magnetics, PTFE and PVC Banner and folding carton such as 2XL (85pt), Extra Heavy (50pt), Light (20pt) and XL (32pt). These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-K9801 is also listed with compatible or alternative reference terms including 500-9801, 9801, Oscillate and Summa 500-9801. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 16.5 mm with a 55 degrees + 81.5 degrees cut angle and a 1.5 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K60 is especially relevant for board – soft such as Corrugated Plastic, Dispa(R), F-Sorb(R), Foam Board and Fome-Cor(R), corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute, corrugated single such as A Flute, B Flute and C Flute, corrugated triple wall such as E/B/E Flute and flexible material such as Carpet, Cork, Ejection Rubber, Fiber Glass and Foam. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 2.2mm + 0.15mm mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K60 is also listed with compatible or alternative reference terms including 5201345, SE60, Z60 and Zund Z60 (5201345). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 7.8 mm with a 55 degrees cut angle and a 0.63 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K42 is especially relevant for corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute, flexible material such as Carpet, Fiber Glass, Garlock(R) and Insulation, composite such as Armid Dry Fiber, Dry Carbon Fiber, Dry Glass Fiber, Kapton and Nomex(R) Dry Fiber, textile such as Aurora Textile, Berger Textile, Canvas, Dacron(R) and Felt and leather such as Leather Hide. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values include a 0.05 + 0.7 mm start overcut and a 0.80 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K42 is also listed with compatible or alternative reference terms including 3910324, 895442, SE42, Z42 and Zund Z42 (3910324). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate, knife – static/drag work and supports material thicknesses up to 7.4 mm with a 53.2 degrees cut angle and a 0.63 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools. The physical dimensions are 2.22 cm long, 1.63 cm wide and .35 cm high, so it can be checked quickly against existing tool storage, ordering records and machine documentation.

In day-to-day production, CS-K16a (Asymmetrical) is especially relevant for board – soft such as Corrugated Plastic, Dispa(R), Foam Board, Fome-Cor(R) and Insite(R) Foam Board, composite such as Prepreg Carbon Fiber, Prepreg Quartz, Prepreg Unidirectional Carbon Fiber and Toray(R) Prepreg Carbon Fiber, corrugated single such as E Flute, F Flute and G Flute, film / vinyl such as 3M(R) Diamond Grade, 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber and General Formulations(R) Vinyl and flexible material such as Cork, Foam, Garlock(R), Gasket Material and Magnetic Foil. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 0.75 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K16a (Asymmetrical) is also listed with compatible or alternative reference terms including asymmetrical. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 8.7 mm with a 22 degrees + 65 degrees cut angle and a 0.63 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K26 is especially relevant for corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute, board – soft such as Corrugated Plastic, Foam Board, Fome-Cor(R), Matboard and Sandwich Board, flexible material such as Carpet, Cork, Foam, Garlock(R) and Gasket Material, folding carton such as 2XL (85pt), Extra Heavy (50pt), Light (20pt) and XL (32pt) and composite such as Armid Dry Fiber, Dry Carbon Fiber, Dry Glass Fiber, Kapton and Nomex(R) Dry Fiber. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 1.20 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K26 is also listed with compatible or alternative reference terms including 42458281, 9006, BLD-SF126, CWT-E26, CWTE26, CWX-E26, CWXE26, E26, G42475962, IECHO E26, K26, Kongsberg BLD-SF426 (42458281), S26 and SE26. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – static/drag work and supports material thicknesses up to 6.9 mm with a 60 degrees cut angle and a 1.5 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K13s is especially relevant for composite such as Kapton, Prepreg Carbon Fiber, Prepreg Quartz, Prepreg Unidirectional Carbon Fiber and Toray(R) Prepreg Carbon Fiber, board – soft such as Corrugated Plastic, Fome-Cor(R) and Polycarbonate Sheet, board – rigid such as EVA – Ethylene Vinyl Acetate, Expanded PVC, Sign Foam(R) and Sintra(R), film / vinyl such as 3M(R) Diamond Grade, 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber and General Formulations(R) Vinyl and flexible material such as Magnetic Foil, Magnum Magnetics, PTFE, PVC Banner and Rubber. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values include a 0.58 mm start overcut and a 0.58 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K13s is also listed with compatible or alternative reference terms including 113, 42443036, 500-9803, 5009803, 895113, 9018, BLD-DF113, Colex T00313, D13s, DE13s, DF113, G42443036, K11s and K24. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 17.2 mm with a 63 degrees + 84 degrees cut angle and a 0.63 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K21 is especially relevant for board – soft such as Corrugated Plastic, Dispa(R), F-Sorb(R), Foam Board and Fome-Cor(R), corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute, corrugated single such as A Flute, B Flute and C Flute, corrugated triple wall such as E/B/E Flute and flexible material such as Carpet, Cork, Ejection Rubber, Fiber Glass and Foam. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 1.6 + 0.11 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K21 is also listed with compatible or alternative reference terms including 3910314, 421, 42458257, 895021, 9004, BLD-SF421, Colex T00421, CWTE21, CWX-E21, CWXE21, E21, G42458257, i-421 and i421. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 14.3 mm with a 63 degrees + 84 degrees cut angle and a 0.63 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K20 is especially relevant for board – soft such as Corrugated Plastic, Dispa(R), F-Sorb(R), Foam Board and Fome-Cor(R), composite such as Armid Dry Fiber, Dry Carbon Fiber, Dry Glass Fiber, Nomex(R) Dry Fiber and Prepreg Carbon Fiber, corrugated single such as A Flute, B Flute, C Flute, D Flute and E Flute, corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute and corrugated triple wall such as E/B/E Flute. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 1.2 mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K20 is also listed with compatible or alternative reference terms including 3910313, 42421974, 500-9811, 5009811, 895020, 9003, 94-02466-910.314, BLD-SF420, Colex T00420, G42421974, i-420, i420, K20 and K66. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – rotary work and supports material thicknesses up to 2 mm and a 0.6 mm blade thickness with a 25 mm diameter. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K53 is especially relevant for composite such as Armid Dry Fiber, Dry Carbon Fiber, Dry Glass Fiber and Nomex(R) Dry Fiber, textile such as Aurora Textile, Berger Textile, Canvas, Dacron(R) and Felt and flexible material such as Fiber Glass. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-K53 is also listed with compatible or alternative reference terms including 4800059, E53, G000-00534, k53, r53, r53-v, z53 and Zund Z53 (4800059). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – rotary work and supports material thicknesses up to 5 mm and a 0.6 mm blade thickness with a 28 mm diameter. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K51 is especially relevant for composite such as Armid Dry Fiber, Dry Carbon Fiber, Dry Glass Fiber and Nomex(R) Dry Fiber and textile such as Aurora Textile, Berger Textile, Canvas, Dacron(R) and Felt. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-K51 is also listed with compatible or alternative reference terms including 003612-MC51-ROTARY, 3910336, 500-9861, 5009861, 9021, CWT-E51, CWTE51, CWX-E51, CWXE51, E51, IECHO E51, K51, R51 and R51-V. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.