The blade is designed for production cutting work.

In day-to-day production, Blade SuedeTM Premium Underlay is intended for the material range shown in the product data and can be used as part of a controlled blade setup where the operator confirms tool choice against the material, table and cutting parameters.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

Blade SuedeTM Premium Underlay is a suitable option when the product name, machine compatibility and material information match the blade already used in production. Always confirm the selected blade against your machine setup and the material being processed before running a full job.

The blade is designed for route – through work and supports material thicknesses up to 32 mm with a Up Cut cut angle.

In day-to-day production, CS-Ru156 is especially relevant for flutes such as 1 Flute, routing diameter such as 6, max rpm such as 50000, shank diameter such as 6 and length overall such as 64. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-Ru156 is also listed with compatible or alternative reference terms including 3910710, 42438077, BIT-MUS06-6032-64, CGR156, Colex T00503, ER66.3C, IECHO ER66.3C, Kongsberg BIT-MUS06-6032-64 (42438077), PSU-2599, R156, R172, T00503 and Zund R156 (3910710). These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – oscillate work and supports material thicknesses up to 24 mm with a 65 degrees cut angle and a 1 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-E18L is especially relevant for board – soft such as Foam Board and Fome-Cor(R), flexible material such as Foam, Magnetic Foil and Magnum Magnetics, textile such as Felt, corrugated single such as E Flute, F Flute and G Flute and folding carton such as Extra Heavy (50pt) and Light (20pt). These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a 0.47 mm mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-E18L is a suitable option when the product name, machine compatibility and material information match the blade already used in production. Always confirm the selected blade against your machine setup and the material being processed before running a full job.

The blade is designed for production cutting work.

In day-to-day production, Xtra Premium Grip underlay is intended for the material range shown in the product data and can be used as part of a controlled blade setup where the operator confirms tool choice against the material, table and cutting parameters.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

Xtra Premium Grip underlay is a suitable option when the product name, machine compatibility and material information match the blade already used in production. Always confirm the selected blade against your machine setup and the material being processed before running a full job.

The blade is designed for knife – oscillate, knife – static/drag work and supports material thicknesses up to 12 mm with a 65 cut angle and a 0.63 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K9801 is especially relevant for corrugated single such as E Flute, F Flute and G Flute, board – soft such as Corrugated Plastic, Dispa(R), Foam Board, Fome-Cor(R) and Insite(R) Foam Board, film / vinyl such as 3M(R) Diamond Grade, 3M(R) Vinyl, Avery Dennison(R) Vinyl, Faux Carbon Fiber and General Formulations(R) Vinyl, flexible material such as Foam, Magnetic Foil, Magnum Magnetics, PTFE and PVC Banner and folding carton such as 2XL (85pt), Extra Heavy (50pt), Light (20pt) and XL (32pt). These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

Because blade choice affects corners, lead-ins and small details, operators should match this item with the cut parameters recommended for the relevant machine and substrate.

CS-K9801 is also listed with compatible or alternative reference terms including 500-9801, 9801, Oscillate and Summa 500-9801. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.

The blade is designed for knife – static/drag work and supports material thicknesses up to 30 mm and a 0.9 mm blade thickness. The flat stock profile gives the blade a familiar handling style for operators who already work with comparable tools.

In day-to-day production, CS-K641 is especially relevant for board – soft such as Reboard(R), corrugated single such as A Flute, B Flute and C Flute, corrugated double wall such as A/B Flute, B/C Flute, B/E Flute, E/B Flute and E/C Flute and corrugated triple wall such as E/B/E Flute. These material matches make it useful for operators who need one blade option that can be selected confidently for common production boards, films, textiles, composites, packaging stock or flexible sheet materials shown in the product data.

The listed overcut values a To be defined mm end overcut, which helps operators compare this blade against nearby alternatives when fine tuning corners, lead-ins and small details.

CS-K641 is also listed with compatible or alternative reference terms including BLD-SF641 and Kongsberg BLD-SF641. These references are helpful when replacing an existing blade, comparing supplier part numbers, or confirming that the product matches the naming used in older job sheets and machine setups.